Bambu Lab Purifier E1 Pro Air Purifier
The Bambu Lab Purifier E1 Pro Air Purifier can be used with the main machine's exhaust system. It supports automatic start/stop, fan speed adjustment, PM2.5 display, and filter status checking to help manage exhaust and air quality during laser processing.
Before Use
- Ensure the purifier is undamaged.
- Ensure the power switch is turned off.
- Ensure the filter is correctly installed inside the purifier.
Front Clearance
Leave at least 5 cm of space in front of the purifier.
Rear Clearance
Leave at least 20 cm of space behind the purifier.
Maintain Airflow
Avoid excessive bending of the hose to prevent airflow restriction.
Keep Clear
Do not place any objects on top of the purifier.
Power and Safety Precautions
- Always disconnect the power before performing maintenance or moving the purifier.
- Do not move the purifier by pulling on the power cord.
- Do not tilt the purifier, and do not lean or sit on it.
- Do not place liquids, powders, flammable materials, or other foreign objects into the air intake.
- If the filter is severely clogged, disconnect the power immediately and stop using the device.
- When replacing the filter, use the official filter to ensure proper filtration performance.
If you experience abnormal noise, odors, high temperatures, or irregular fan rotation, disconnect the power and stop using the equipment immediately.
The Purifier E1 Pro cannot filter carbon monoxide (CO) or radon (Rn) and therefore should not be used as safety equipment during combustion accidents or hazardous chemical incidents. If used simultaneously with domestic gas appliances such as gas stoves or gas water heaters, ensure the environment is well-ventilated to reduce the risk of carbon monoxide poisoning.
Included Accessories
Exhaust Hose
Hose Connector
Power Cord
4-Pin Cable
Bambu Lab Purifier E1 Pro Installation Steps
1 Remove Packaging
Open the outer box, remove the cushioning materials, and take out the quick start guide and accessories.
Remove the purifier and remove the outer protective bag and the fixing tape on both sides. The quantity and placement of the tape may vary; please refer to the actual version received.
Open the top cover from the handle, remove the internal foam pad, and then close the cover.
2 Connect the Exhaust Hose
Before connecting, ensure the main machine's exhaust fan and exhaust hose are properly installed.
Take the main machine's exhaust hose and pull open the threaded end.
Screw the adapter into the exhaust hose.
Insert the exhaust hose into the air intake of the purifier, ensuring the connection is secure and not loose, while avoiding excessive bending of the hose.
3 Insert the 4-Pin Cable
Take out the included 4-pin cable. Plug one end into the 4-pin expansion port on the side of the main machine, and the other end into the 4-pin port on the back of the purifier.
4 Connect the Power
Take the included power cord, connect the purifier to a wall outlet, and turn on the power switch.
Wait for the purifier to start up. Once the successful connection icon appears on the screen, you can begin using it.
5 Connect the Outlet Air Hose
Take out the included air hose. Connect one end of the hose, along with the adapter, to the air outlet of the purifier, and place the other end outdoors. Avoid excessive bending of the hose during installation.
For daily use, ensure there is 5 cm of clearance in front and 20 cm of clearance behind the purifier.
Button and Screen Operation
During daily use, the Purifier E1 Pro can start and stop automatically with the main machine's tasks and dynamically adjust fan speed based on the task type.
Power Button
Short press to wake up or turn off the screen.
Long press after power-on to stop the purifier and enter standby mode; long press again to wake the purifier back up.
Fan Speed Button
Short press to cycle through: Level 1 → Level 2 → Level 3 → Auto Mode → Off.
Long press to switch screen pages, view filter status, check error messages, or return to the air quality home page.
Screen Icon Descriptions
- 1. Connection Status Once the purifier is connected to the main machine using the 4-pin cable, the purifier's home screen will automatically display the connection icon. If the icon does not appear, the device firmware may not yet support this feature; please update the firmware on the main machine and check again.
- 2. Filter Type Displays information about the currently installed and in-use filter.
- 3. Real-time PM2.5 Displays real-time air quality values after the exhaust has been processed by the filter.
- 4. Fan Status Defaults to Auto Mode. Short press the fan speed button to cycle between Auto, Level 1, Level 2, Level 3, and Off.