xTool SafetyPro™ AP2 Smoke Purifier
High-density filtration, layer-by-layer cleaning, for your total peace of mind
6 filters weighing approx. 9kg, layer-by-layer cleaning
6 filters weigh 9kg (excluding the cyclone layer; the remaining 5 filters weigh approx. 8kg), ensuring maximum removal of smoke and odors to protect respiratory health during laser processing.
99% capture of large particles
36 small cyclones work in parallel to generate ultra-strong centrifugal force, effectively separating dust and dirt, and preventing filter clogging.
Extends filter life by 10 times
Combined with the cyclone separator, all large particles are separated, extending the filter's service life by up to 10 times compared to filters without one.
*Results are estimated based on residue filtration from laser cutting 3mm acrylic and common woods.
Washable and reusable
It is easy to disassemble for cleaning and reuse. Simply wash it to keep the cyclone separator like new, thereby significantly extending the filter's service life.
Strong airflow, rapid purification
The AP2's 150 m³/h airflow effectively purifies dust generated from desktop operations. The AP2 Max features a powerful airflow of up to 700 m³/h, specifically designed for large-scale heavy industrial laser and welding operations.
AP2 Max Exclusive
Decomposes formaldehyde for deeper cleaning
The formaldehyde filter effectively captures and decomposes harmful formaldehyde molecules, breaking them down into harmless water and carbon dioxide for a more thorough purification effect.
Beyond convenience, smarter than you imagine
Carefully designed for a better experience
The ultimate dust removal solution
Ultra-slim cyclone separation technology
Product Contents List
xTool SafetyPro™ AP2 Smoke Purifier
xTool SafetyPro™ AP2/AP Max Smoke Purifier
FAQ
Is the AP2 Max compatible with other brands of laser cutters and welders?
Yes, it is compatible if your machine's exhaust requirement is 700 m³/h or less, and the exhaust outlet diameter is between 60-110mm or 200-250mm. However, smart features will not be available.
Is the AP2 compatible with other brands of laser equipment?
The AP2 is designed for machines with an exhaust volume of 150 m³/h or less. If your machine's exhaust falls within this range, it should work with the AP2. However, you will need to prepare your own exhaust outlet adapter.
This product supports a 3-inch exhaust hose. It is compatible with laser printers, hybrid 3D printers with laser modules, and DTF 3D printers, provided their exhaust pipe dimensions meet this requirement.
Why is the xTool P3 incompatible with the AP2?
The AP2 is designed for machines with an exhaust volume of 150 m³/h or less, but the P3 has an exhaust volume of 238 m³/h. The airflow of the AP2 cannot meet this demand. Therefore, if the P3 is connected to the AP2 for cutting, it will still generate a significant amount of smoke and odor.
Can the vent be directed into the room?
Yes, the exhaust gas can be vented directly into the room, as our purified exhaust meets indoor air quality requirements for direct venting.
How often should the cyclone separator be cleaned?
It is recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.
It is recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.
Product Specifications
| Item | Specification |
|---|---|
| xTool SafetyPro™ AP2 Smoke Purifier | |
| Compatible Models (Normal Mode) | All xTool machines (63.5mm exhaust port), also compatible with laser machines of other brands |
| Compatible Models (Smart Mode) | xTool M1 Ultra, F1 Ultra, P2S, S1 |
| Product Dimensions | 290 × 491 × 542 mm |
| Product Weight | 20.7 kg |
| Control Mode | Touch buttons, four-level adjustment |
| Pre-filtration System | Cyclone separation |
| Rated Power | 220W |
| Filter Layers | Super cyclone filter Pre-filter Medium-efficiency filter Activated carbon layer Ultra-high density carbon mesh High-efficiency filter |
| Noise | 55 dB |
| xTool SafetyPro™ AP2 Max Smoke Purifier | |
| Power Input | AC 100–240V / 50–60Hz / 900W |
| Air Volume | 700 m³/h |
| Filtration System | 1 Primary filter element 2 Medium-efficiency filter element 3 Activated carbon filter element 4 High-density carbon mesh filter element 5 Formaldehyde removal filter element 6 High-efficiency filter element |
| Number of Cyclones | 72 |
| Air Volume Control Range | 1–100% |
| Noise | 65 dB |
| Dimensions | 662 × 452 × 845 mm |
| Compatible Models | xTool P3, MetalFab, and all existing xTool models |