Online shopping

Bambu Dual-Texture PEI Series
Product model BL00019
Brand Bambu Lab
Price 900(TAX)

Quantity

品項

Bambu Dual-Texture PEI Plate
 

Bambu Dual-Texture PEI Plate

 

Two Textures (Textured and Smooth) in One Plate
Enjoy the benefits of two different textures in one plate, one side is Textured PEI surface and the other side is Smooth PEI surface. This Plate features a 0.5mm magnetic stainless steel plate that enhances magnetic adhesion and helps to prevent warping and ensure optimal print quality during 3D printing.





Smooth PEI Surface :

High Z-axis Precision Printing
The use of a Smooth PEI Plate contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension. These qualities make the Smooth PEI Plate an excellent choice for printing parts that demand a high level of fit accuracy, where precise alignment and tight tolerances are crucial.


Bambu Smooth PEI Plate - High Z-axis Precision Printing
 

Smooth and Matte Surface Finish
The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.





Textured PEI Surface :

Excellent First-layer Adhesion and Improved Durability
Textured PEI surface has enhanced the durability, and improved the adhesion between the prints and the plate, eliminating the need for adhesives.
*In some situations, glue is required for very specific filaments


Textured PEI Surface  -  eliminating the need for adhesives


Self-release when Cooled Down

Textured PEI surface can withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature.



Considerations

Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.

• Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.

• Carefully sanding the Textured PEI surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.

• If bubbles appear on the bottom of the Smooth PEI sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.

• Do not clean the Bambu Dual-Texture PEI Plate with Acetone, as it will damage the PEI surface.

• Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. 

• Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.


• 
The Bambu Dual-Texture PEI Plate is considered a consumable part, which will degrade over time.

 

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed
Temperature
Glue Stick Required for
Smooth PEI Surface
?
Glue Stick Required for
Textured PEI Surface?
PLA/PLA-CF/PLA-GF 45~65℃ No No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue No
ABS
(not for A1 mini)
90~100℃ Glue Stick/Liquid Glue No
ASA
(not for A1 mini)
90~100℃ Glue Stick/Liquid Glue No
TPU 35~45℃ Glue Stick/Liquid Glue Glue/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue No
PC/PC-CF
(not for A1 mini)
90~110℃ Glue Stick Glue Stick
PA/PA-CF/PAHT-CF
(not for A1 mini)
90~110℃ Glue Stick Glue Stick
PET-CF
(not for A1 mini)
80~100℃ Glue Stick/Liquid Glue No
 


Installation Steps

Bambu Dual-Texture PEI Plate - Installation Step 1

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you


Bambu Dual-Texture PEI Plate - Installation Step 2

Step 2 : Lower the plate and secure to the magnetic platforma

 
 
Contact us to get more information about Bambu Lab products!

Material PEI powder coating+ magnetic Stainless Steel Plate + Smooth PEI Sheet
Texture PEI coating / PEI sheet thickness 0.075mm/ 0.125mm
Color Gold, Charcoal Grey
Flexible Spring Steel Thickness 0.5mm
Usable Print Size 256*256mm / 180*180mm (A1 Mini)
Package Size 300*270*17mm / 220*190*15mm (A1 Mini)
Package Weight 0.45kg / 0.23kg (A1 Mini)

side2_mod_top side2_mod_bottom
Back to Top