Online shopping

Snapmaker Ray 20W & 40W Laser Engraver and Cutter
Product model SK00000
Brand Snapmaker

品項



Snapmaker Ray 20W & 40W Laser Engraver and Cutter Series - With Air Assist

Smart Investment, Elegance with Class 1 Safety
Snapmaker Ray is a 20W & 40W air-assisted laser engraver and cutter with a 400mm × 600mm working area. It incorporates Snapmaker's signature industrial grade linear rails and offers Class 1 laser safety.

Click Here to See 👉 Snapmaker Ray Unboxing Article
 
Key Features:
• 20W & 40 W Diode Laser
• Industrial-grade Linear Rails
• Smart Air Assist
• 500mm/s Max. Work Speed
• 400 x 600mm Work Area
• Laser Class 1 Safety Certified by FDA
• 1000+ Laser Vectors in Luban
• Easy Focus with Focus Lever
• Orientation Detection
• Overheat Protection
 
 
Cutting-edge Laser Beam Combining Technology

40W Laser Module delivers superb performance with the most cutting-edge laser beam splitter and beam shaping optics.

 
Snapmaker ray has Cutting-edge Laser Beam Combining Technology
 
 

Comparison of 20W and 40W Laser Module

Snapmaker  20W and 40W Laser Module
 
Basswood Plywood
 
    
Snapmaker 20W Laser Module cutting 10mm basswood plywood    Snapmaker 40W Laser Module cutting 15mm basswood plywood
                                                                                                                       
                             Material: Basswood Plywood                                                 Material: Basswood Plywood
     20W           Thickness: 10mm (one pass)                           40W              Thickness: 15mm (one pass)
 Laser Module    Speed: 3mm/s                                             Laser Module        Speed: 3mm/s
                          Power: 100%                                                                            Power: 100%
                          Initial Cutting Height Offset: 3mm                                        Initial Cutting Height Offset: 3mm
 
Pinewood
   
Snapmaker 20W Laser Module cutting 15mm pinewood    Snapmaker 40W Laser Module cutting 20mm pinewood
                                                                                                                       
                             Material: Pinewood                                                                Material: Pinewood
     20W           Thickness: 15mm (one pass)                          40W              Thickness: 20mm (one pass)
 Laser Module    Speed: 2mm/s                                             Laser Module       Speed: 2mm/s
                          Power: 100%                                                                           Power: 100%
                          Initial Cutting Height Offset: 4mm                                       Initial Cutting Height Offset: 4mm
 
*Video of comparison is 8x faster.
Strong Cutting Capabilities

Empowered by 40W output power.

Snapmaker Ray has Strong Cutting Capabilities
  
Achieve Cleaner Cuts with Air Assist

1. Air gets pumped in.
2. Blow the fumes away and prevent charring.
3. Keep the laser lens clean
4. Fumes get channeled out through grid table.

 

Snapmaker Ray achieve Cleaner Cuts with Air Assist

 
400mm x 600mm Work Area

You can produce large projects such as maps, furniture models and doorplates. Ray can be raised with a cylindrical base, allowing you to work with a laser job up to 160mm thick.

 
Snapmaker Ray has 400mm x 600mm Work Area
 
Industrial-grade Linear Rails

Support work speed up to 500mm/s and long-lasting operation.
 

Snapmaker Ray has Industrial-grade Linear Rails

 
500mm/s Max. Speed


Snapmaker Ray has 500mm/s Max. Speed

 
Compatible with LightBurn

Support features like serial connection, movement control, and G-code generation. Access full sets of recommended parameters for common laser materials in LightBurn.
 

Snapmaker Ray is compatible with LightBurn

 
1000+ Laser Vectors in Luban

Luban provides an extensive library of preset templates, including common patterns, shapes, and icons, for you to come up with a design in minutes.

 
Snapmaker Ray has 1000+ Laser Vectors in Luban
  
Laser Class 1 Safety Certified by FDA

The Enclosure panels made with brown acrylic are specially designed to shield you from the laser hazards. The embedded door-detection sensor lets Ray automatically stop the laser job when the door is opened.

Snapmaker Ray has Laser Class 1 Safety Certified by FDA
 
Dust Isolation

Turn on the exhaust fan to cast off all the smoke and dust. You can further connect it with our Air Purifier to filter harmful chemicals.

 
Snapmaker Ray has dust isolation
  
Laser Focusing Made Easy with Quick Swap

In just three steps, you can easily finish the calibration.

 
Snapmaker Ray has quick swap function
 
Rotary Engraving

The upcoming Rotary Module can work on more daily life objects in the shape of ring, cone, sphere, or cylinder, etc.

Snapmaker Rotary Engraving


Snapmaker Ray 40W Cutting Test

 

Contact us to help you make the right choice and solve your problem! Click here to see more Snapmaker Laser Engraver and Accessories!

  Ray 40W Laser Engraver and Cutter Ray 20W Laser Engraver and Cutter
Performance
Laser Module Output Power 40W 20W
Laser Electric Power 140W 65W
Machine Power (Enclosure excl.) 215W 140W
Maximum Thickness of One-pass 15mm Basswood Plywood 10mm Basswood Plywood
Maximum Work Speed 500mm/s
Maximum Cutting Speed 20mm/s 10mm/s
Laser Spot Dimensions 0.1mm x 0.15mm 0.08mm x 0.1mm
Laser Type 450 - 460nm Semi-conductor
Dimension
Weight (Enclosure excl.) 15.06kg 14.6kg
Dimension (Enclosure excl.) 849 x 600 x 303 mm 849 x 600 x 278 mm
Dimension (Enclosure) 933 x 665 x 417 mm
Maximum Workpiece Height 160mm (with two sets of cylindrical feet)
Work Area 400 x 600 mm 400 x 600 mm
Supported Materials
Engraving Materials Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Painted Metal, Tinplate, Stainless Steel, Anodized Aluminum, Dark Glass, Slate, Brick, Ceramic, Jade, Marble, Shale, Leather, Fabric, Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Cutting Materials Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric, Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded), Stainless Steel (0.1mm) Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric, Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded)
Software
Supported Design File STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR
Supported Processing File NC
Software Luban, LightBurn
Connection  USB
Compatibility
Addons Enclosure for Snapmaker Ray, Air Purifier, 20W & 40W Laser Module, Rotary Module, 1064nm Infrared 2W Laser Module (coming soon)

side2_mod_top side2_mod_bottom
Back to Top