Bambu Lab A1 Mini 3D Printer Series

Bambu Lab A1 Mini Combo Entry-Level Multicolor 3D Printer

The Bambu Lab A1 Mini is a compact, affordable, and easy-to-use entry-level 3D printer. Paired with the AMS Lite, the A1 Mini Combo supports four-color printing, fully automatic calibration, active flow rate compensation, and remote monitoring.

Equipment sales, technical support, and warranty services are provided by 3DMART, the official Bambu Lab distributor in Taiwan. You can also read the Bambu Lab A1 Mini Combo Multicolor 3D Printer Hands-on Review to learn more about its operation and printing performance.

Key Features of the Bambu Lab A1 Mini

Fully automatic calibration
AMS Lite for four-color printing
Silent mode under 48 dB
Full-metal linear rails and bearings
Vibration and flow rate compensation

Main functions and features of the Bambu Lab A1 Mini 3D printer

A1 Mini Combo with AMS Lite for Four-Color Printing

Easy-to-use multicolor 3D printing

The AMS Lite features a compact automatic material supply structure. Paired with the A1 Mini, it enables four-color printing, lowering the barrier for multicolor model production. It is suitable for education, creative projects, model making, and personalized parts manufacturing.

Bambu Lab A1 Mini with AMS Lite for four-color 3D printing

A1 Mini Combo multicolor 3D printed model results

Bambu Lab A1 Mini Combo four-color printing applications

Bambu Lab A1 Mini Automatic Calibration and Precision Extrusion

Active flow rate compensation

The A1 Mini uses a high-resolution, high-frequency eddy current sensor to measure nozzle pressure. An algorithm then actively compensates for the flow rate based on the readings, helping to maintain precise extrusion, smooth corners, and stable surface quality.

Fully automatic calibration

Before printing, the A1 Mini automatically calibrates Z-offset, build plate leveling, vibration resonance, and nozzle pressure. This reduces tedious manual adjustments, allowing users new to 3D printing to get started quickly.

A1 Mini Quick Setup and Low-Noise Printing

Pre-assembled design, ready in about 20 minutes

The A1 Mini arrives pre-assembled, pre-calibrated, and pre-leveled. After receiving the equipment, follow the manufacturer's steps to set it up in about 20 minutes, with no complex manual adjustments required.

Bambu Lab A1 Mini pre-assembled and quick installation design

Active motor noise cancellation

The A1 Mini can calibrate parameters based on the subtle differences in each drive motor to compensate for unnecessary noise. Combined with active noise cancellation and silent mode, the operating noise can be kept below 48 dB, making it suitable for homes, classrooms, and studios.

Bambu Lab A1 Mini motor active noise cancellation and under 48 dB silent mode

High-Speed Printing and Bambu Software Integration

Full-metal structure and motion control

The A1 Mini is equipped with full-metal rails and a frame, a nozzle pressure sensor, an accelerometer, and a motion control system. With the right materials and slicing settings, it balances printing speed, dimensional accuracy, and surface quality; factory demonstrations show it can complete a test boat model in approximately 14 minutes.

Bambu Lab A1 Mini high-speed precision 3D printing

Supports Bambu Studio and Bambu Handy

Users can perform model slicing and printing settings via Bambu Studio, and remotely control or monitor print status via Bambu Handy. The built-in camera also allows for recording time-lapse videos.

Bambu Lab A1 Mini support for Bambu Studio and Bambu Handy remote monitoring

To compare other models, check out the Bambu Lab 3D Printer Series, or contact 3DMART to evaluate the suitable equipment and AMS configuration.

Bambu Lab A1 Mini One-Year Warranty and Repair Information

3DMART provides standard or extended warranty options, which can be selected based on your intended usage scenario at the time of purchase.

Extended warranty plans must be selected at the time of order and cannot be added after shipment.
If equipment issues occur, please first fill out the 3DMART technical support form.
When sending for repair, you must use the original packaging, including the box and protective foam, and include relevant accessories such as the power adapter, memory card, cables, and the material used when the issue occurred.
Damage caused by human error, unauthorized modifications, as well as consumables and spare parts are not covered under the standard warranty; actual determinations and service content are subject to 3DMART warranty regulations.
Operational training is a separate paid service available upon request via the contact form.

Before sending for repair, please read the 3DMART Warranty Product Repair Application Process and Regulations.

For operation or purchase inquiries, please email client@3dmart.com.tw.

Contact 3DMART to Inquire about the Bambu Lab A1 Mini

Bambu Lab A1 Mini Combo 3D Printer Specifications

Bambu Lab A1 Mini Combo specifications include a 180 × 180 × 180 mm build volume, a 300°C all-metal hotend, 500 mm/s toolhead speed, AMS Lite multi-color printing system, as well as camera, material sensing, and remote operation capabilities.

Item	Specification
Printing Technology & Device Dimensions
Model	Bambu Lab A1 Mini
Printing Technology	Fused Deposition Modeling (FDM/FFF)
Build Volume (W × D × H)	180 × 180 × 180 mm
Device Dimensions	347 × 315 × 365 mm
Net Weight	5.5 kg
Hotend, Extruder & Nozzle
Hotend	All-metal hotend
Extruder Gears	Steel gears
Included Nozzle Material	Stainless steel
Maximum Hotend Temperature	300°C
Included Nozzle Diameter	0.4 mm
Optional Nozzle Diameters	0.2, 0.6, 0.8 mm
Filament Cutter	Built into the toolhead
Filament Diameter	1.75 mm
Max Hotend Flow Rate	28 mm³/s. Test conditions: 150 × 150 mm single-layer wall model, Bambu Lab ABS, print temperature 280°C.
Build Plate & Motion Performance
Compatible Build Plates	Bambu Textured PEI Plate, Bambu Smooth PEI Plate
Maximum Heatbed Temperature	80°C
Maximum Toolhead Speed	500 mm/s
Maximum Toolhead Acceleration	10 m/s² (10,000 mm/s²)
Cooling & Control
Part Cooling Fan	Closed-loop control
Hotend Cooling Fan	Closed-loop control
Mainboard Cooling Fan	Closed-loop control
Supported Printing Materials
Recommended Materials	Suitable: PLA, PETG, TPU, PVA
Not Recommended Materials	Not recommended: ABS, ASA, PC, PA, PET, and carbon fiber or glass fiber reinforced materials.
Camera & Sensor Features
Monitoring Camera	Built-in low-frame-rate camera, up to 1080p, supports time-lapse recording
Filament Run-out Sensor	Supported
Filament Odometer	Supported
Filament Tangle Sensor	Supported
Power Loss Recovery	Supported
Power & User Interface
Input Voltage	100–240 VAC, 50/60 Hz
Maximum Power	150 W
Display Screen	2.4-inch, 320 × 240 IPS touchscreen
Storage Media	microSD card
User Interface	Touchscreen, mobile app, desktop app
Motion Controller	Dual-core Cortex-M4 processor
Slicer Software & Wireless Connectivity
Native Slicer Software	Bambu Studio
Third-party Slicer Software	Third-party slicers that support exporting standard G-code, such as SuperSlicer, PrusaSlicer, and Cura, can be used; some smart features may not be available.
Supported Operating Systems	macOS, Windows
Wireless Network	IEEE 802.11 b/g/n Wi-Fi
A1 Mini Combo Package Contents
Main Device & Accessories	Bambu Lab A1 Mini 3D Printer Bambu Lab AMS Lite unit AMS Lite stand AMS Lite spool holder × 5 Nozzle cleaning scraper Bambu Textured PEI Plate PTFE tube × 5 Accessory box 20 g Bambu filament × 1 (color and type randomized)

Product contents may be adjusted based on version, batch, or regional configuration; please refer to actual product options, packaging, and order information. Print speed, flow, and material compatibility may vary depending on the nozzle, material, model, slicing parameters, and operating environment.

PRODUCTS LIST

輔助文件