【Vacuum Forming】 Unboxing the FORMART 3 Smart Vacuum Forming Machine!
From unboxing to first creation, a complete experience of a new generation desktop vacuum forming machine
In product development, model making, packaging design, and maker education, "vacuum forming" has always been an important technology for rapidly producing shells, blister packaging, and molds. However, traditional vacuum forming equipment often requires tedious parameter settings and extensive experience, deterring many users.
The FORMART series, developed by the Taiwanese team MYYARD, was created precisely to solve this problem. The newly launched FORMART 3 smart vacuum forming machine not only continues the intelligent features of its predecessor but also comprehensively upgrades operational convenience, vacuum performance, and demolding efficiency.
This time, we will unbox the FORMART 3 and see what highlights this "easiest-to-use vacuum forming machine" has to offer.
Unboxing and Appearance
Upon receiving the FORMART 3, the outer box uses thick corrugated cardboard for protection, and both the machine body and accessories are independently secured. After opening the packaging, you can see the standard accessory contents:
- FORMART 3 main unit
- Adjustable size tray set
- PET plastic sheet experience pack
- Cat bowl mold sample
- USB cable
- Heat-resistant gloves
- Scissors
- Hex wrench
- Corner draw removal tool
- Column draw removal tool
- Chinese operating interface and documentation
The accessory completeness is quite high, allowing beginners to directly experience vacuum forming without needing to purchase additional tools.
Machine Body Design Introduction
The FORMART 3 continues the brand's consistent desktop design, but with many optimizations in detail. The machine is equipped with a full-color LCD screen display interface, allowing direct selection of:
- Material type
- Plastic sheet size
- Forming mode
- Custom parameters
The interface is designed in Chinese, making it easy to understand even for first-time vacuum forming machine users.
New Patented Tray
One of the biggest upgrades to the FORMART 3 is the tray mechanism. Common problems in previous vacuum forming included: plastic sheet slipping, uneven clamping, and troublesome material changes.
To optimize the process, the FORMART 3 adopts: one-press locking, one-pull release, and adjustable spring clamping, significantly increasing material change speed.
Unboxing and Assembly
- Assemble the stainless steel tubes: Rotate and lock the four stainless steel tubes clockwise into the four corners of the machine.
- Insert the tray into the track: With the handle end facing the front of the machine, slide the tray into the stainless steel tubes.
- Assemble the heater: Install the heater on top of the stainless steel tubes and secure it with the 4 M5 x 25 screws provided.
- Secure the connecting rods on both sides of the tray: Pull up the connecting rods on both sides of the tray and connect them to the locking points on both sides of the heater. Use the 8 M4 x 6 screws provided to secure the connecting rods to the locking points on the heater.
- Assemble the handle: Combine the handle with the lower edge of the connecting rods on both sides of the tray and secure it with the M5 x 6 screws provided.
- Assemble the plastic side cover: Place the plastic side cover over the area in STEP 5 and secure it with M5 x 7 screws.
- Connect the heater power: Plug the heater's power into the two sockets at the back of the machine base.
- Assemble the power outlet cover: Secure the power cord outlet cover in the area in STEP 7 and tighten the screws.
- Unlock the tray: Pull the silver pull shafts at both ends of the tray. Once the tray is successfully unlocked, you can lift the tray using the handle.
Quick Start
- Turn on the power: After turning on the power, the FORMART 3 will automatically perform a smart check.
- Select operating mode: After the automatic smart check is complete, you can select the desired operating mode using the control knob.
- Place the material: Place the material sheet on the machine's base plate. The FORMART 3 supports four sizes (50 × 30 cm, 42 × 30 cm, 30 × 30 cm, 30 × 20.5 cm), which can be adjusted by switching the base plate area.
- Pull down the tray to secure the material: Press down the handle to lower the tray to the bottom and lock it.
- Set the task: Use the machine knob to select and adjust the material and thickness settings. You can also use the FORMART 3's built-in smart database.
- Pull up the tray to heat the material: Pull up the handle to raise the tray and start heating the material sheet. Wait for it to heat to the appropriate temperature; the machine screen will display the heating progress.
- Pull down the tray for vacuum forming: Following the instructions, press down the handle to lower the tray to the bottom and lock it. The FORMART 3 will begin forming, cooling, and blow-off demolding.
- Release the pull shafts to unlock the tray: Pull the silver pull shafts at both ends of the tray. Once the tray is successfully unlocked, you can lift the tray using the handle to complete the vacuum forming.
Product Observation
After actual forming, its significant advantages can be observed:
- ✓ Complete detail retention
- ✓ High corner fit
- ✓ Uniform forming
- ✓ Almost no wrinkles
- ✓ Fast demolding
Especially on deeper molds, the FORMART 3's vacuum force and heating uniformity are significantly superior to many entry-level devices.
Who is FORMART 3 suitable for?
- Industrial designers: Rapid prototyping of product shells
- 3D printing enthusiasts: Creating blister packaging with 3D printed molds
- Model enthusiasts: Making clear covers, car shells, and parts trays
- Educational institutions: STEAM curriculum teaching
- Small-batch production studios: Manufacturing blister packaging and display packaging
- Cosplay creators: Making helmets, armor, and prop shells
The biggest feature of the FORMART 3 is not simply enhanced vacuum suction, but the smart integration of the entire vacuum forming process. Compared to traditional equipment that requires manual adjustment of temperature, time, vacuum strength, and dehumidification conditions, the FORMART 3 automates almost all parameters, allowing users to focus on creation itself.
With its new patented tray, 300W industrial-grade vacuum system, exclusive plastic sheet dehumidification function, and robust demolding design, it significantly lowers the learning curve for product development, maker education, or small-batch production.
If you are looking for a desktop vacuum forming machine that combines ease of use with professional performance, the MYYARD FORMART 3 is undoubtedly a noteworthy new option in the current market.
Want to learn more about MY YARD Vacuum Forming Machines? Click "Contact Us" below!
3DMART offers more than just 3D printing; we provide three major OEM services: "3D Printing Service", "3D Scanning Service", and "360° Space 3D Scanning Service"!