Online shopping

ColorFabb Light Weight-PLA Natural
Product model CF00002
Brand ColorFabb
Price 1780(TAX)



ColorFabb Light Weight-PLA Natural Series

ColorFabb LW-PLA (Lightweight PLA) is the best 3D printing thread for 3D printing RC planes, cosplay and other lightweight items. It's light as a feather yet retains good strength and is easy to cut, trim and sand. When part weight is important, LW PLA is the way to go.

Product Features:
Reduce the weight of printed parts by up to 65% compared to standard PLA.
Control the volume of material extruded by controlling the printing temperature. At around 230C, LW-PLA starts to foam and can increase its volume by almost 3 times.
With one spool of LW-PLA you can print as much as with 3 spools of regular PLA due to the 3x lower material multiplier / flow.
Easy to cut, trim, sand and paint.
LW-PLA (Natural, Black, Grey, Silver & Red) hides layer lines really well.
Material oozes on travelmoves, this is normal and can't be reduced completely.
Colour becomes lighter when the material is at its maximum foamed state as opposed to the non-foamed state which has a deeper and richer colour.

LW-PLA Natural 3D Printed Samples:
ColorFabb Light Weight PLA Natural Sample
ColorFabb Light Weight PLA Natural Sample
ColorFabb Light Weight PLA Natural Sample
Comparison with other material

Click Here to See the ColorFabb LW-PLA Tutorial

Diameter (Tolerance) ± 0.1 mm
Density 1.210-1.430 g/cm3(Non-foaming density)
Glass Transition Temperature 55℃
Recommened 3D Printing Temperature 195°C-260°C
Recommened 3D Printing Speed 40-100 mm/s
Suggested Hot Bead Temperature (Not neccessary) 50°C-60℃

side2_mod_top side2_mod_bottom
Back to Top