Online shopping

Phrozen BASF Protowhite Rigid Resin
Product model PH0145
Brand Phrozen
Price 2199(TAX)


Phrozen BASF Protowhite Rigid 3D Printing Resin

Backed by one of the world's most respected chemical companies, BASF Forward AM, Phrozen Protowhite Rigid 3D Printing Resin enables designers to efficiently prototype in-house before moving to the production stage.

Key Features :
Rigid resin from BASF Forward AM: Phrozen Protowhite Rigid 3D Printing Resin enables industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact-resistant 3D models.

• Easily visualise your design ideas: Turn conceptual ideas into complex 3D models to showcase low-volume, high-quality prototypes for more efficient communication.

Ideal for prototype development: Experiment and compare different 3D printed prototypes such as mechanical parts, jigs, fixtures and eyewear to refine design usability.

• Save time with rapid prototyping: Demonstrate 3D models and gather peer feedback to identify improvements and reduce the risk of design errors before moving to full production.

3D Printing Samples

Phrozen BASF Protowhite Rigid Resin 3D Printing Sample

Phrozen BASF Protowhite Rigid Resin 3D Printing Samples

Phrozen BASF Protowhite Rigid Resin 3D Printing Samples

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.
• Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after wash, then postcure on both sides, 30 minutes per side.
• Minor color differences between the printed parts and website pictures do not impact the final performances.

Contact us to get more information about Phrozen 3D Printer and Resins!

Density 1.1 g / cm3
Viscosity 220 cP
Density 1.10 g/cm3
Surface Hardness 77 Shore D
Tensile Modulus 2300 MPa
Tensile Stress at Break 57 MPa
Elongation at Break 15 %
Flexural Modulus 1920 MPa
Flexural Strength 94 MPa
Notched Izod Impact Strength 28.00 J/m
Unnotched Izod Impact Strength 662 J/m
HDT at 0.45 MPa 55°C
HDt at 1.82 MPa 49°C

side2_mod_top side2_mod_bottom
Back to Top