Phrozen Water-Washable 3D Printing Resin Series (1kg)
The Phrozen Water-Washable resins can be used to wash the surface directly with water; the printing speed is fast, and the hardness and toughness of the finished product are high, which is suitable for 3D printing of all kinds of models and products.
Note: Please wash with water and spray with air gun and do not pour the cleaned water directly. Please collect the lamp and filter it before dumping, or add 10% waste water treatment agent and filter or dump the residues and sediments.
Rapid Black Model Gray
Phrozen Water-Washable 3D Printing Resin Tutotrial
Phrozen 水洗韌性樹脂
水洗更方便，酒精用量減少90%
新款水洗韌性樹脂讓後處理更靈活多樣，並可減少高達90%的酒精用量。使用普羅森清洗機和水即可輕鬆清潔，不僅更安全，還能簡化步驟、節省成本！
市面水洗樹脂的兩倍韌性
普羅森新款水洗韌性樹脂經過特殊配方設計，堅韌度是市面上其他水洗樹脂的兩倍，讓模型在清洗、後處理等過程中更不易損壞*。
體驗更佳，列印更輕鬆
新款水洗韌性樹脂異味大幅降低，並且更好列印，還能減少酒精等清洗劑的消耗。更棒的是，模型更堅韌，不怕在移除和搬動時輕易斷裂，帶來更佳的列印體驗，是水洗樹脂首選。
韌性白-3D列印成品實例:
.png "韌性白-3D列印成品實例")
韌性灰-3D列印成品實例:
.png "韌性灰-3D列印成品實例")
Precautions：
．Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
．After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
．Keep resin away from kids and away from direct sunlight exposure.
．Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
．DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Click Here to Download :
1) Rapid Black Resin Safety Data Sheet
2) Model Gray Resin Safety Data Sheet
3) Phrozen Resin Data（Sonic Mighty 4K）
Click Here to Watch :
Enjoy the light-curing printing experience with Phrozen's wide range of resins, which can be tailored to your needs and properties to give you the best finished product, or contact us for more information !
Rapid Black
| Viscosity |
120 cP |
| Density |
1.11 g/ cm3 |
| Tg |
80 °C |
| Elongation at Break |
18 % |
| Tensile Stress at Break |
15 MPa |
| Surface Hardness |
76 Shore D |
| Notched Izod Impact |
1.3 J/m |
| Wieght |
1kg |
| XY Planar Resolution |
0.050 mm |
| Suggested Layer |
30-100um |
| Recommended Cleaning Method |
Wash the surface with water and blow dry with air gun, easy to use. (Please collect the cleaning water and filter it before disposal or add 10% waste water treatment agent and filter it after disposal). |
Model Gray
| Viscosity |
125 cP |
| Density |
1.10 g/ cm3 |
| Tg |
80 °C |
| Elongation at Break |
24 % |
| Tensile Stress at Break |
12 MPa |
| Surface Hardness |
77 Shore D |
| Notched Izod Impact |
3.04 J/m |
| Weight |
1kg |
| XY Planar Resolution |
0.050 mm |
| Suggested Layer |
30-100um |
| Tensile Modulus |
110 MPa |
| Recommended Cleaning Method |
Wash the surface with water and blow dry with air gun, easy to use. (Please collect the cleaning water and filter it before disposal or add 10% waste water treatment agent and filter it after disposal). |